FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
88 CLI Reference Guide for Directors and Edge Switches
Syntax
show
Purpose
This command displays the switch binding configuration.
Parameters
This command has no parameters.
Output
This command displays the following switch binding configuration data:
Output Example
The output from the config.security.portBinding.show command
displays as follows:
Switch Binding State: Enabled and Restricting E Ports
00:11:22:33:44:55:66:77
88:99:AA:BB:CC:DD:EE:FF
11:55:35:45:24:78:98:FA
config.security.switchBinding.show
switchBindingState The state of switch binding, which can
have the following values: Disabled,
Enabled and Restricting
F_Ports, Enabled and
Restricting E_Ports, or
Enabled and Restricting All
Ports.
Switch Binding Membership List The WWNs of members of the SBML
saved on the switch.