FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

CLI Commands
90 CLI Reference Guide for Directors and Edge Switches
Syntax
administrator “username” “password”
Purpose
This command sets the name and password for administrator-level access.
Description
Immediately after the name and password for the administrator is set, you will be
prompted to log in with the new access rights.
Parameters
This command has two parameters:
Command Example
Root> config security userRights administrator “Administrator”
“newpassword”
config.security.userRights.administrator
username Specifies the new user name for administrator-level login.
Default is set to Administrator.
This parameter is 1–15 characters.
Valid characters include all characters in the USASCII
character set, excluding control characters and spaces.
Spaces are not valid even though quotation marks are used.
password Specifies the password for administrator-level login.
Default is set to password.
This parameter is 1–15 characters.
Valid characters include all characters in the USASCII
character set, excluding control characters and spaces.
Spaces are not valid even though quotation marks are used.