FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.security.userRights.operator
91CLI Reference Guide for Directors and Edge Switches
Syntax
operator “username” “password”
Purpose
This command sets the name and password for operator-level access.
Parameters
This command has two parameters:
Command Example
Root> config security userRights operator “Operator”
“newpassword”
config.security.userRights.operator
username Specifies the new user name for operator-level login.
Default is Operator.
This parameter is 1–15 characters.
Valid characters include all characters in the USASCII
character set, excluding control characters and spaces.
Spaces are not valid even though quotation marks are used.
password Specifies the password for operator-level login.
Default is password.
This parameter is 1–15 characters.
Valid characters include all characters in the USASCII
character set, excluding control characters and spaces.
Spaces are not valid even though quotation marks are used.