Manualshelf

FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

ManualsBrandsHP ManualsStorageHP StorageWorks Director 2/64 base 32 port config
919293949596979899100
CLI Commands
98 CLI Reference Guide for Directors and Edge Switches
Syntax
setState enabledState
Purpose
This command enables or disables the SNMP agent. When disabled, the SNMP
agent does not respond to any requests or send any traps.
Parameters
This command has one parameter.
Command Example
Root> config snmp setState 1
config.snmp.setState
enabledState Sets the state of the SNMP agent. This
parameter can be set to enable or disable.
Boolean 1 and 0 values may also be
substituted.