FW V06.XX/HAFM SW V08.02.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches Reference Guide (AA-RQ7AE-TE, July 2004)

config.snmp.show
99CLI Reference Guide for Directors and Edge Switches
Syntax
show
Purpose
This command shows the switch SNMP configuration.
Parameters
This command has no parameters.
Command Example
Root> config snmp show
Output
The switch configuration data is displayed as a table that includes the following
properties:
config.snmp.show
SNMP Agent State The state of the SNMP agent. If it is disabled,
the SNMP state does not respond to any
requests and does not produce any traps.
FA MIB Version
Number
Version of the MIB that the SNMP agent is
configured to use.
Authorization Traps The state of the authorization traps (for
example, enabled) that will be sent to SNMP
management stations when unauthorized
stations attempt to access SNMP information
from the switch.
Index The community index number.
Community Name The name of the community.
writeAuth The write authorization state.
Trap Recipient The address of the trap recipient shown in
4-byte dotted-decimal format.