64 Installation Guide (AA-RSNGD-TE, July 2004)

Installing and Configuring the Director

108 Director 2/64 Installation Guide

Configuring Open Trunking

This option is only available if the optional Open Trunking feature is installed.

Choosing this option opens the Configure Open Trunking dialog box. For details

on enabling Open Trunking and configuring such parameters as congestion

thresholds for ports, event notification options, and low BB credit threshold, refer

to the HP StorageWorks Director Element Manager User Guide.

Enabling Embedded Web Server

Use the following steps to enable EWS:

1. At the Hardware View page, choose Configure > Enable Web Server.

Choosing Enable Web Server automatically places a check mark in the

check box.

2. Choose Enable Web Server again to remove the check mark and disable the

EWS interface. When disabled, remote users cannot access the interface.

For complete procedures on using EWS, refer to the HP StorageWorks Embedded

Web Server User Guide.

Enabling Telnet

Use the following steps to enable Telnet:

1. At the Hardware View, choose Configure > Enable Telnet. Choosing

Enable Telnet automatically places a check mark in the check box.

2. Choose Enable Telnet again to remove the check mark and disable telnet

access. When disabled, remote users cannot access the director through telnet.