64 Installation Guide (AA-RSNGD-TE, July 2004)

Installing and Configuring the Director

80 Director 2/64 Installation Guide

2. Right-click the Director 64 icon. A pop-up menu for the selected director

displays, as shown in Figure 41.

In the example, the director’s status is operational as indicated by the green

circle in the alert panel.

3. Check director status at the Hardware View page and complete one of the

following steps:

a. If the director displays as operational (no FRU alert symbols), go to

“Configuring Feature Key” on page 107.

b. If director operation displays as degraded or a director failure is indicated

(FRU alert symbols and a yellow triangle or red diamond at the alert

panel), refer to the HP StorageWorks Director 2/64 Service Manual.

Table 6: Director Operational States and Symbols

Operational State Symbol

Operational—Director-to-server communication has been established,

the director is operational, and no failures are indicated.

No Status

Symbol

Degraded—Director-to-server communication has been established,

but the director is operating in degraded mode and requires service.

This condition is typical if a port or redundant FRU fails. Go to step 2.

Failed—Director-to-server communication has been established, but

the director failed and requires immediate service. Go to step 2.

Status Unknown—The director status is unknown because of a network

communication failure between the director and HAFM appliance. Go

to step 2.