64 Installation Guide (AA-RSNGD-TE, July 2004)

Installing and Configuring the Director

81Director 2/64 Installation Guide

Figure 41: Hardware View page (with FRU failures)

Set Director Date and Time

The Director Element Manager log entries are stamped with the date and time

received from the director. Use these steps to set the effective date and time for the

director:

Note: The director and HAFM synchronize at least once daily.

1. At the Hardware View, choose Configure > Date/Time. The Configure Date

and Time dialog box displays, as shown in Figure 42.

2. Set director date and time manually, or set for periodic updates. For specific

instructions, see the following sections:

■ Set Director Date and Time, page 81

■ Synchronize Date and Time, page 82