FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Director 2/64 Service Manual (AA-RS2ED-TE, July 2004)

Diagnostics
106 Director 2/64 Service Manual
2. Highlight the director to be reconfigured from the Available Addresses list,
and click Change. The Editing Domain Information dialog box displays, as
shown in Figure 24.
Figure 24: Editing Domain Information dialog box
3. Click OK. The Domain Information dialog box displays with the IP Address
page open, as shown in Figure 25.
Figure 25: Domain Information dialog box (IP Address page)
4. Enter the correct IP address in the IP Address field.
5. Click OK to save the new IP address, close the dialog box, and redefine the
director to the HAFM application.
6. Click OK to close the Discover Setup dialog box.
At the HAFM master log, did the IP address below the director icon change to the
new entry and did the Ethernet connection recover?
NO YES
↓ The director-to-HAFM appliance connection is restored and is
operational. Exit MAP.
Contact the next level of support. Exit MAP.