64 Service Manual (AA-RS2ED-TE, July 2004)

Diagnostics

119Director 2/64 Service Manual

Was an event code 080, 081, 504, 505, 506, 507, 512, 514, 800, 801, or 802

observed at the director Event Log (HAFM appliance) or at the Embedded Web

Server Event Log?

YES NO

↓ Go to step 3.

Was an event code 581, 582, 583, 584, 585, or 586 observed at the console of an

OSI or FICON server attached to the director reporting the problem?

YES NO

↓ Go to step 4.

Table 12 lists event codes, brief explanations of the codes, and associated steps

that describe fault isolation procedures.

Table 12: MAP 0600: Event Codes

Event Code Explanation Action

080 Unauthorized World-Wide Name. Go to step 18

081 Invalid attachment. Go to step 20

504 UPM card failure. Go to step 6

505 UPM card revision not supported. Go to step 44

506 Fibre Channel port failure. Go to step 6

507 Loopback diagnostics port failure. Go to step 14

512 SFP optical transceiver nonfatal error. Go to step 6

514 SFP optical transceiver failure. Go to step 6

581 Implicit incident. Go to step 37

582 Bit error threshold exceeded. Go to step 37

583 Loss of signal or loss of synchronization. Go to step 37

584 Not operational primitive sequence received. Go to step 37

585 Primitive sequence timeout. Go to step 37