64 Service Manual (AA-RS2ED-TE, July 2004)

Diagnostics

127Director 2/64 Service Manual

The port has an invalid attachment. The Reason field in the Port Properties dialog

box specifies the reason. See Table 14 for a list of reasons and appropriate actions.

The port connection conflicts with the configured port type. Either an expansion

port (E_Port) is incorrectly cabled to a Fibre Channel device or a fabric port

(F_Port) is incorrectly cabled to a fabric element (director or switch).

1. At the Hardware View, click Configure > Ports. The Configure Ports dialog

box displays.

2. Use the vertical scroll bar as necessary to display the information row for the

port indicating an invalid attachment.

3. Click the Type field and configure the port from the list box as follows:

■ Click fabric port (F_Port) if the port is cabled to a device (node).

Table 14: MAP 0600: Invalid Attachment Reasons and Actions

Reasons Action

Unknown Contact the next level of support.

ISL connection not allowed on this port. Go to step 20

Incompatible switch at other end of ISL. Go to step 21

External loopback adapter connected to

the port.

Go to step 22

N-Port connection not allowed on this port. Go to step 20

Non-HP switch at other end of the ISL. Go to.step 21

Port binding violation-unauthorized

WWN.

Go to step 18

Unresponsive node connected to port. Go to step 23

ESA security mismatch. Go to step 28

Fabric binding mismatch. Go to step 29

Authorization failure reject. Go to step 23

Unauthorized switch binding WWN. Go to step 33

Fabric mode mismatch. Go to step 21

CNT WAN extension mode mismatch. Go to step 31