64 Service Manual (AA-RS2ED-TE, July 2004)

Diagnostics

150 Director 2/64 Service Manual

5. Click the Active Zone Set tab. The Zoning dialog box displays with the

Active Zone Set page open, as shown in Figure 38.

Figure 38: Zoning dialog box (Active Zone Set tab)

6. Inspect zone names in the active zone set to determine the incompatible name.

7. Modify the incompatible zone name as directed by the customer:

a. At the Zoning dialog box, click the Zone Library tab. The dialog box

returns to the Zone Library page, as shown in Figure 37 on page 149.

b. Right-click the zone name to be changed from the Zones field. A pop-up

menu displays.

c. Click Rename. The selected zone name remains highlighted in blue.

d. Enter the new zone name (specified by the customer).

e. Click OK to activate the change and close the Zoning dialog box.

Did the zone name change solve the problem, and did both directors join through

the ISL to form a fabric?

NO YES

↓ The directors, associated ISL, and multi-switch fabric are operational.

Exit MAP.

Contact the next level of support. Exit MAP.