64 Service Manual (AA-RS2ED-TE, July 2004)

Diagnostics

154 Director 2/64 Service Manual

Did the corrective action solve the problem and relieve the reported low

BB_Credit condition?

NO YES

↓ The ISL is operational. Exit MAP.

Contact the next level of support. Exit MAP.

A 150 event code indicates a zone merge failed during ISL initialization. Either an

incompatible zone set was detected or a problem occurred during delivery of a

zone merge frame. This event code always precedes a 070 event code, and

represents the reply of an adjacent fabric element in response to a zone merge

frame.

Obtain supplementary event data for each 150 event code.

1. At the Hardware View, click Logs > Event Log. The Event Log displays.

2. Examine the first 12 bytes (0 through 11) of event data.

3. Bytes 0 through 3 specify the E_Port number (00 through 23) reporting the

problem. Bytes 8 through 11 specify the failure reason (Table 19).

Table 19: Bytes 8 through 11 Failure Reasons and Actions

Bytes 8 - 11 Failure Reason Action

01 Invalid data length. Go to step 24

08 Invalid zone set format. Go to step 24

09 Invalid data. Go to step 25

0A Cannot merge. Go to step 25

F0 Retry limit reached. Go to step 24

F1 Invalid response length. Go to step 24

F2 Invalid response code. Go to step 24