64 Service Manual (AA-RS2ED-TE, July 2004)

Diagnostics

155Director 2/64 Service Manual

A zone merge failed during ISL initialization. The following list explains the

reason:

■ Failure reason 01—An invalid data length condition caused an error in a

zone merge frame.

■ Failure reason 08—An invalid zone set format caused an error in a zone

merge frame.

■ Failure reason F0—A retry limit reached condition caused an error in a zone

merge frame.

■ Failure reason F1—An invalid response length condition caused an error in a

zone merge frame.

■ Failure reason F2—An invalid response code caused an error in a zone

merge frame.

Disconnect the fiber-optic jumper cable from the E_Port reporting the problem,

then reconnect the cable to the same port.

Did disconnecting and reconnecting the cable solve the problem, and was the

resulting zone merge successful?

NO YES

↓ The merged zone is operational. Exit MAP.

Perform the data collection procedure and return the CD to HP for analysis.

Contact the next level of support. Exit MAP.

A zone merge failed during ISL initialization. The following list explains the

reason:

■ Failure reason 09—Invalid data caused a zone merge failure.

■ Failure reason 0A—A Cannot Merge condition caused a zone merge failure.

Obtain supplementary error code data for the 150 event code.

1. At the Hardware View, click Logs > Event Log. The Event Log displays.

2. Examine bytes 12 through 15 of event data that specify the error code. Record

the error code.

Perform the data collection procedure and return the CD to HP for analysis.

Contact the next level of support, and report the 150 event code, the associated

failure reason, and the associated error code. Exit MAP.