64 Service Manual (AA-RS2ED-TE, July 2004)

Diagnostics

159Director 2/64 Service Manual

b. The green hard disk drive (HDD) LED blinks momentarily, and processor

speed and random-access memory information display momentarily at the

LCD panel.

c. After a few seconds, the LCD panel displays a message, as shown in

Figure 8 on page 48.

d. Ignore the message. After ten seconds, the server performs the boot

sequence from the basic input/output system (BIOS). During the boot

sequence, the server performs additional POSTs and displays the

following operational information at the LCD panel:

—Host name.

— System date and time.

— LAN 1 and LAN 2 IP addresses.

— Fan 1, fan 2, fan 3, and fan 4 rotational speed.

— Central processing unit (CPU) temperature.

— Hard disk capacity.

— Virtual and physical memory capacity.

4. After successful POST completion, the LCD panel displays a Welcome!!

message, then continuously cycles through and displays HAFM appliance

operational information.

5. After rebooting the HAFM appliance at the LCD panel, log on to the HAFM

appliance Windows 2000 desktop through a LAN connection to a

browser-capable PC. The HAFM application starts and the HAFM 8 Log In

dialog box displays, as shown in Figure 9 on page 49.

Did POSTs detect a problem?

NO YES

↓ A computer hardware problem exists. Refer to the supporting

documentation shipped with the HAFM appliance for instructions on

resolving the problem. Exit MAP.