64 Service Manual (AA-RS2ED-TE, July 2004)

165Director 2/64 Service Manual

Repair Information

This chapter describes repair and repair-related procedures used by service

representatives for the Director 2/64 and associated field-replaceable units

(FRUs). The procedures are performed using one of the following:

■ HAFM application

■ Director 2/64 Element Manager

■ Embedded Web Server (EWS)

The following procedures are described in this chapter:

■ Using Log Information, page 167

■ Obtaining Port Diagnostic Information, page 170

■ Collecting Maintenance Data, page 197

■ Clean Fiber Optic Components, page 199

■ Power-On Procedure, page 200

■ Power-Off Procedure, page 201

■ IML, IPL, or Reset the Director, page 202

■ Set the Director Online or Offline, page 205

■ Block and Unblock Ports, page 207

■ Manage Firmware Versions, page 211

■ Manage Configuration Data, page 218

■ Install or Upgrade Software, page 223

Do not perform repairs until a failure is isolated to an FRU. If fault isolation was

not performed, go to “MAP 0000: Start MAP” on page 46.