64 Service Manual (AA-RS2ED-TE, July 2004)

Repair Information

179Director 2/64 Service Manual

Viewing Port Properties

To open the Port Properties dialog box, perform the following:

1. Double-click a port in the Port Card View or a port row in the Port List View.

The Port Properties dialog box displays, as shown in Figure 42.

Figure 42: Port Properties dialog box

The Port Properties dialog box provides the following information:

Note: If the Open Trunking feature is installed, an additional item, Congested

Threshold %, displays in the Port Properties dialog box.

■ Port Number—The director port number (0 through 63 inclusive).

■ Port Name—The user-defined name or description for the port.

■ Type—The Port type (G_Port, F_Port, or E_Port) type of port (G_Port if

nothing is attached to the port, F_Port if a device is attached to the port, and

E_Port if the port is connected to another director or switch as part of an

ISL).

■ Operating Speed—The operating speed of the port (Not Established,

1Gbps, or 2 Gbps).

■ Fibre Channel Address—The port’s Fibre Channel address identifier.

■ Port WWN—The Fibre Channel WWN for the director port.

■ Attached Port WWN—The WWN of the node logged into the port.