64 Service Manual (AA-RS2ED-TE, July 2004)

Repair Information

182 Director 2/64 Service Manual

Viewing Port Technology

To open the Port Technology dialog box, perform the following:

1. Right-click a port in the Port Card View or the Port List View. The Port menu

displays.

2. Click Port Technology. The Port Technology dialog box displays, as shown

in Figure 43.

Figure 43: Port Technology dialog box

The Port Technology dialog box provides the following information:

■ Port Number—Director port number (0 through 63 inclusive).

■ Connector type—Type of port connector (LC, Unknown, or Internal Port).

■ Transceiver—Type of port transceiver (Shortwave Laser, Longwave Laser,

Long Distance Laser, Unknown, or None).

■ Distance—Port transmission distance (50m to 10Km)

■ Media—Type of optical cable used (Singlemode, multimode 50-micron,

multimode 62.5-micron, or Unknown).

■ Speed—Operating speed (Not Established, 1 Gigabit, or 2 Gigabit).

EWS Interface

To obtain port operational information at the EWS interface, inspect parameters at

the:

■ Monitor Panel—Port List page.

■ Monitor Panel—Port Stats page.

■ View panel—Port Properties page.