64 Service Manual (AA-RS2ED-TE, July 2004)

Repair Information

183Director 2/64 Service Manual

Viewing the Port List Page

When the EWS interface opens, the View panel displays as the default. To view

the Port List page, perform the following:

1. At the View panel, click Monitor on the left side of the panel. The Monitor

panel displays with the Port List page open, as shown in Figure 44.

Figure 44: Monitor panel (Port List page)

A row of information for each port (0 through 63 inclusive) appears. Each row

consists of the following columns:

■ Port #—The director port number.

■ Name—The port name of 24 alphanumeric characters or less. The name

typically characterizes the device or fabric element to which the port is

attached.

■ Block Configuration—Indicates if a port is blocked or unblocked. Blocking

a port prevents the attached devices or fabric element from communicating. A

blocked port continuously transmits the offline sequence (OLS).

■ State—Port state (Online, Offline, Not Installed, Inactive, Invalid

Attachment, Link Reset, No Light, Not Operational, Port Failure,

Segmented E_Port, or Testing).

■ Type—The port type (G_Port if nothing is attached to the port, F_Port if a

device is attached to the port, and E_Port if the port is connected to another

director or switch as part of an ISL).