64 Service Manual (AA-RS2ED-TE, July 2004)

Repair Information

206 Director 2/64 Service Manual

Set Offline State

To set the director offline:

1. Notify the customer the director will be set offline. Ensure the customer’s

system administrator quiesces Fibre Channel frame traffic through the

director and sets attached devices offline.

2. Open the HAFM application. The View All - HAFM 8 main window displays.

3. Double-click the icon representing the director to be set offline. The Hardware

View for the selected director displays.

4. Click Maintenance > Set Online State. If the director is online, the Set

Online State dialog box displays, as shown in Figure 53, indicating the state

is ONLINE.

Figure 53: Set Online State dialog box (online)

5. Click Set Offline. A Warning dialog box displays, indicating the director will

be set offline.

6. Click OK. As the director goes offline:

— The OLS sequence is transmitted to all attached devices.

— At the Element Manager, the State field of the Director 2/64 Status table

displays OFFLINE.