64 Service Manual (AA-RS2ED-TE, July 2004)

Repair Information

219Director 2/64 Service Manual

4. Click Backup. When the backup process finishes, the Backup Complete

dialog box displays, as shown in Figure 65.

Figure 65: Backup Complete dialog box

5. Click OK to close the dialog box and return to the Hardware View.

Restore the Configuration

To restore the director configuration file from the HAFM appliance:

1. Notify the customer the director will be set offline. Ensure the customer’s

system administrator quiesces Fibre Channel frame traffic through the

director and sets attached devices offline.

2. Set the director offline (“Set Offline State” on page 206).

3. Open the HAFM application. The View All - HAFM 8 main window displays.

4. Double-click the icon representing the director for which the configuration

file will be restored. The Hardware View for the selected director displays.

5. Click Maintenance > Backup & Restore Configuration. The Backup and

Restore Configuration dialog box displays, as shown in Figure 64 on

page 218.

6. Click Restore. A Warning message box displays, as shown in Figure 66.

Figure 66: Warning dialog box

7. Click Yes. When the restore process finishes, the Restore Complete dialog

box displays.

8. Click OK to close the dialog box and return to the Hardware View.