64 Service Manual (AA-RS2ED-TE, July 2004)

Repair Information

221Director 2/64 Service Manual

9. To restart a HAFM appliance session using the default IP address of

10.1.1.10:

a. Close the Director 2/64 Element Manager and return to the HAFM

application.

A grey square with a yellow exclamation mark displays adjacent to the

icon representing the reset director, indicating the director is not

communicating with the HAFM appliance.

b. At the HAFM application, click Discover > Setup. The Discover Setup

dialog box displays, as shown in Figure 68.

Figure 68: Discover Setup dialog box

c. Highlight the entry representing the director in the Available Addresses

window and click Change. The Domain Information dialog box displays,

as shown in Figure 69.

Figure 69: Domain Information dialog box

d. Enter 10.1.1.10 in the IP Address field and click OK. Entries at the

Discover Setup dialog box reflect the new IP address.

e. At the Discover Setup dialog box, click OK. Director-to-HAFM

appliance communication is restored and the procedure is complete.