64 Service Manual (AA-RS2ED-TE, July 2004)

Event Code Tables

341Director 2/64 Service Manual

Event Code: 150 (Continued)

Event Data: Bytes 0–3 of the event data specify affected E_Port number(s). Bytes 8–11 specify the

failure reason as follows:

01 = Invalid data length–An invalid data length condition caused an error in a zone

merge frame. Disconnect the E_Port link, then reconnect the link. If the condition

persists, perform the data collection procedure and return the backup CD to HP

support personnel.

08 = Invalid zone set format–An invalid zone set format caused an error in a zone

merge frame. Disconnect the E_Port link, then reconnect the link. If the condition

persists, perform the data collection procedure and return the backup CD to HP

support personnel.

09 = Invalid data–Invalid data caused a zone merge failure. Inspect bytes 12–15 of

the event data for error codes. See the error code definitions on the following page

to correct the problem.

0A = Cannot merge–A Cannot Merge condition caused a zone merge failure.

Inspect bytes 12–15 of the event data for error codes. See the error code definitions

on the following page to correct the problem.

F0 = Retry limit reached–A retry limit reached condition caused an error in a zone

merge frame. Disconnect the E_Port link, then reconnect the link. If the condition

persists, perform the data collection procedure and return the backup CD to HP

support personnel.

F1 = Invalid response length–An invalid response length condition caused an error

in a zone merge frame. Disconnect the E_Port link, then reconnect the link. If the

condition persists, perform the data collection procedure and return the backup CD

to HP support personnel.

F2 = Invalid response code–An invalid response code caused an error in a zone

merge frame. Disconnect the E_Port link, then reconnect the link. If the condition

persists, perform the data collection procedure and return the backup CD to HP

support personnel.