64 Service Manual (AA-RS2ED-TE, July 2004)

Diagnostics

36 Director 2/64 Service Manual

Maintenance Analysis Procedures

Note: HAFM and Element Manager screens in this manual may not match the screens

on your server and workstation. The title bars have been removed, and the fields may

contain data that does not match the data seen on your system.

Fault isolation and related service procedures are provided through MAPs. The

procedures vary depending on the diagnostic information provided. MAPs consist

of step-by-step procedures that prompt service personnel for information or

describe a specific action to be performed. MAPs provide information to interpret

system events, isolate a director failure to a single FRU, remove and replace the

failed FRU, and verify director operation.

Factory Defaults

Table 3 lists the defaults for the passwords and IP, subnet, and gateway addresses.

Table 3: Factory-set Defaults

Item Default

Customer password password

Maintenance password level-2

IP address 10.1.1.10

Subnet mask 255.0.0.0

Gateway address 0.0.0.0