FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Director 2/64 Service Manual (AA-RS2ED-TE, July 2004)

Diagnostics
71Director 2/64 Service Manual
54
The link incident record provides the attached director port number(s) and one or
more of the following event codes and messages. Record all event codes that may
relate to the reported problem.
581—Link interface incident—implicit incident.
582—Link interface incident—bit-error threshold exceeded.
583—Link failure—loss of signal or loss of synchronization.
584—Link failure—not-operational primitive sequence (NOS) received.
585—Link failure—primitive sequence timeout.
586—Link failure—invalid primitive sequence received for the current link
state.
Were one or more event codes found?
YES NO
↓ Perform director fault isolation at the HAFM appliance (or
customer-supplied server). Go to step 3.
Go to Table 5 on page 37.
MAP 0100: Power Distribution Analysis
This MAP describes fault isolation for the director power distribution system,
including defective AC power cords, redundant power supplies, or the power
module assembly.
1
Was an event code 200, 201, 202, or 208 observed at the Director 2/64 Event Log
(HAFM appliance) or at the EWS Event Log?
YES NO
↓ Go to step 10.