64 Service Manual (AA-RS2ED-TE, July 2004)

Diagnostics

86 Director 2/64 Service Manual

The backup CTP2 card failed POST/IPL diagnostics (as indicated by an event

code 413) and must be removed and replaced (“RRP: Redundant CTP2 Card” on

page 231).

■ This procedure is concurrent and can be performed while director power is on.

■ Perform the data collection procedure as part of FRU removal and

replacement.

Note: Do not remove and replace a redundant CTP2 card if the backup CTP2 card is

not fully operational and director power is on. The director IP address, configuration

data, and other operating parameters will be lost.

Did CTP2 card replacement solve the problem?

NO YES

↓ The director is operational. Exit MAP.

Contact the next level of support. Exit MAP.