FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Director Element Manager User Guide (AA-RTDUC-TE, July 2004)
Table Of Contents
- Contents
- About this Guide
- Overview
- Feature Keys
- Managing the Director
- Element Manager Description
- Using the Element Manager
- Backing Up and Restoring Element Manager Data
- Monitoring and managing the Director
- Hardware View
- Port Card View
- Port List View
- Node List View
- Performance View
- FRU List View
- Port Operational States
- Link Incident Alerts
- Threshold Alerts
- Configuring the Director
- Configuring Identification
- Configuring Management Style
- Configuring Operating Parameters
- Configuring a Preferred Path
- Configuring Switch Binding
- Configuring Ports
- Configuring Port Addresses (FICON Management Style)
- Configuring an SNMP Agent
- Configuring Open Systems Management Server
- Configuring FICON Management Server
- Configuring Feature Key
- Configuring Date and Time
- Configuring Threshold Alerts
- Creating New Alerts
- Figure 49: Configure Threshold Alert(s) dialog box
- Figure 50: New Threshold Alerts dialog box - first screen
- Figure 51: New Threshold Alerts dialog box - second screen
- Figure 52: New Threshold Alerts dialog box - third screen
- Figure 53: New Threshold Alerts dialog box - summary screen
- Figure 54: Configure Threshold Alerts dialog box - alert activated
- Modifying Alerts
- Activating or Deactivating Alerts
- Deleting Alerts
- Creating New Alerts
- Configuring Open Trunking
- Exporting the Configuration Report
- Enabling Embedded Web Server
- Enabling Telnet
- Backing Up and Restoring Configuration Data
- Using Logs
- Using Maintenance Features
- Optional Features
- Information and Error Messages
- Index
Configuring the Director
163Director Element Manager User Guide
2. Choose the folder where you want to save the file.
3. Type in a file name and extension in the File name field.
4. Click Save. The file saves to the specified folder as an ASCII text file.
Enabling Embedded Web Server
Use the following steps to enable EWS:
1. At the Hardware View page, click Configure > Enable Web Server.
Choosing Enable Web Server automatically places a check mark in the
check box.
2. Click Enable Web Server again to remove the check mark and disable the
EWS interface. When disabled, remote users cannot access the interface.
For complete procedures on using EWS, refer to HP StorageWorks Embedded
Web Server User Guide.
Enabling Telnet
Use the following steps to enable Telnet:
1. At the Hardware View, click Configure > Enable Telnet. Choosing Enable
Telnet automatically places a check mark in the check box.
2. Click Enable Telnet again to remove the check mark and disable Telnet
access. When disabled, remote users cannot access the director through
Telnet.