FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Director Element Manager User Guide (AA-RTDUC-TE, July 2004)
Table Of Contents
- Contents
- About this Guide
- Overview
- Feature Keys
- Managing the Director
- Element Manager Description
- Using the Element Manager
- Backing Up and Restoring Element Manager Data
- Monitoring and managing the Director
- Hardware View
- Port Card View
- Port List View
- Node List View
- Performance View
- FRU List View
- Port Operational States
- Link Incident Alerts
- Threshold Alerts
- Configuring the Director
- Configuring Identification
- Configuring Management Style
- Configuring Operating Parameters
- Configuring a Preferred Path
- Configuring Switch Binding
- Configuring Ports
- Configuring Port Addresses (FICON Management Style)
- Configuring an SNMP Agent
- Configuring Open Systems Management Server
- Configuring FICON Management Server
- Configuring Feature Key
- Configuring Date and Time
- Configuring Threshold Alerts
- Creating New Alerts
- Figure 49: Configure Threshold Alert(s) dialog box
- Figure 50: New Threshold Alerts dialog box - first screen
- Figure 51: New Threshold Alerts dialog box - second screen
- Figure 52: New Threshold Alerts dialog box - third screen
- Figure 53: New Threshold Alerts dialog box - summary screen
- Figure 54: Configure Threshold Alerts dialog box - alert activated
- Modifying Alerts
- Activating or Deactivating Alerts
- Deleting Alerts
- Creating New Alerts
- Configuring Open Trunking
- Exporting the Configuration Report
- Enabling Embedded Web Server
- Enabling Telnet
- Backing Up and Restoring Configuration Data
- Using Logs
- Using Maintenance Features
- Optional Features
- Information and Error Messages
- Index
Information and Error Messages
227Director Element Manager User Guide
Routing is not
supported by the
switch.
This switch or director
does not support the
Show Routes feature.
Choose a different switch or
director to show the route.
SANtegrity Feature not
installed. Please
contact your sales
representative.
You selected Fabric
Binding or Enterprise
Fabric Mode from the
Fabrics menu. These
selections are not
enabled because the
optional SANtegrity
binding feature is not
installed.
Install the SANtegrity Binding
feature to use Fabric Binding or
enable Enterprise Fabric Mode.
Select alias to add to
zone.
An alias was not
selected before
clicking Add.
Choose an alias before clicking
Add.
Selection is not a
World Wide Name.
The selection made is
not a World Wide
Name.
Choose a valid World Wide
Name before performing this
operation.
Server shutting down. The
HAFM
application
is closing and
terminating
communication with
the attached product.
Reboot the HAFM appliance. If
the problem persists, contact
the next level of support.
SNMP trap address
not defined.
If an SNMP community
name is defined, a
corresponding SNMP
trap recipient address
must also be defined.
Enter a corresponding SNMP
trap recipient address.
Switch is not managed
by HAFM.
The selected switch or
director is not
managed by the
HAFM
application.
Choose a different switch or
director.
The Administrator user
cannot be deleted.
The administrator user
is permanent and
cannot be deleted
from the Configure
Users dialog box.
Informational message
only—no action is required.
Table 9: HAFM Messages (Continued)
Message Description Action