FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Director Element Manager User Guide (AA-RTDUC-TE, July 2004)
Table Of Contents
- Contents
- About this Guide
- Overview
- Feature Keys
- Managing the Director
- Element Manager Description
- Using the Element Manager
- Backing Up and Restoring Element Manager Data
- Monitoring and managing the Director
- Hardware View
- Port Card View
- Port List View
- Node List View
- Performance View
- FRU List View
- Port Operational States
- Link Incident Alerts
- Threshold Alerts
- Configuring the Director
- Configuring Identification
- Configuring Management Style
- Configuring Operating Parameters
- Configuring a Preferred Path
- Configuring Switch Binding
- Configuring Ports
- Configuring Port Addresses (FICON Management Style)
- Configuring an SNMP Agent
- Configuring Open Systems Management Server
- Configuring FICON Management Server
- Configuring Feature Key
- Configuring Date and Time
- Configuring Threshold Alerts
- Creating New Alerts
- Figure 49: Configure Threshold Alert(s) dialog box
- Figure 50: New Threshold Alerts dialog box - first screen
- Figure 51: New Threshold Alerts dialog box - second screen
- Figure 52: New Threshold Alerts dialog box - third screen
- Figure 53: New Threshold Alerts dialog box - summary screen
- Figure 54: Configure Threshold Alerts dialog box - alert activated
- Modifying Alerts
- Activating or Deactivating Alerts
- Deleting Alerts
- Creating New Alerts
- Configuring Open Trunking
- Exporting the Configuration Report
- Enabling Embedded Web Server
- Enabling Telnet
- Backing Up and Restoring Configuration Data
- Using Logs
- Using Maintenance Features
- Optional Features
- Information and Error Messages
- Index
Overview
22 Director Element Manager User Guide
■ Configure a nickname to display instead of the WWN for the director and for
attached node devices.
■ Configure Port Binding.
■ Configure port address configurations (FICON management style only).
■ Configure SNMP trap recipients and community names.
■ Configure the FICON and Open Systems Management Server features if
optional Open Systems Management Server is installed.
■ Configure Switch Binding if optional SANtegrity Binding feature is installed.
■ Configure Open Trunking if optional Open Trunking feature is installed.
■ Configure the management style between Open Systems and FICON
management.
■ Configure the director name, location, description, and contact person.
■ Configure the data speed for the director (Director 2/64 only) and individual
ports.
■ Configure threshold alerts for ports.
■ Control individual Fibre Channel ports by blocking/unblocking operation,
enabling LIN alerts and Port Binding, setting data speeds, and running
internal and external loopback diagnostics.
■ Display FRU properties such as the FRU name, physical position in the
director (chassis slot number), active/failed state, part number, and serial
number.
■ Display information for individual Fibre Channel ports, such as the port name,
port number, Fibre Channel address, operational state, type of port, and login
data.
■ Display information on nodes attached to ports.
■ Display port performance and statistics.
■ Display vital product data for the director, such as the system name,
description, contact person, location, status, model number, firmware and
Engineering Change (EC) level, and manufacturer.
■ Enable beaconing for ports and the director unit.
■ Enable channel wrap mode (FICON management style only).
■ Maintain a port address library (FICON management style only).