FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Director Element Manager User Guide (AA-RTDUC-TE, July 2004)
Table Of Contents
- Contents
- About this Guide
- Overview
- Feature Keys
- Managing the Director
- Element Manager Description
- Using the Element Manager
- Backing Up and Restoring Element Manager Data
- Monitoring and managing the Director
- Hardware View
- Port Card View
- Port List View
- Node List View
- Performance View
- FRU List View
- Port Operational States
- Link Incident Alerts
- Threshold Alerts
- Configuring the Director
- Configuring Identification
- Configuring Management Style
- Configuring Operating Parameters
- Configuring a Preferred Path
- Configuring Switch Binding
- Configuring Ports
- Configuring Port Addresses (FICON Management Style)
- Configuring an SNMP Agent
- Configuring Open Systems Management Server
- Configuring FICON Management Server
- Configuring Feature Key
- Configuring Date and Time
- Configuring Threshold Alerts
- Creating New Alerts
- Figure 49: Configure Threshold Alert(s) dialog box
- Figure 50: New Threshold Alerts dialog box - first screen
- Figure 51: New Threshold Alerts dialog box - second screen
- Figure 52: New Threshold Alerts dialog box - third screen
- Figure 53: New Threshold Alerts dialog box - summary screen
- Figure 54: Configure Threshold Alerts dialog box - alert activated
- Modifying Alerts
- Activating or Deactivating Alerts
- Deleting Alerts
- Creating New Alerts
- Configuring Open Trunking
- Exporting the Configuration Report
- Enabling Embedded Web Server
- Enabling Telnet
- Backing Up and Restoring Configuration Data
- Using Logs
- Using Maintenance Features
- Optional Features
- Information and Error Messages
- Index
Overview
23Director Element Manager User Guide
■ Monitor the operational status of the director and each of its hardware
field-replaceable units.
■ Perform an initial program load (IPL).
■ Perform maintenance tasks for the director including maintaining firmware
levels, enabling the call-home feature, accessing the director logs, and
collecting data to support failure analysis.
■ Reset port operation.
■ Run port diagnostics.
■ Set the date and time on the director.
■ Swap addresses between ports (FICON management style only).
Note: You may perform configuration for some features through both the HAFM and
the Element Manager. You must also enable Element Manager feature permissions for
Administrative, Operator, and Maintenance user levels through the HAFM. When this
guide refers to the HAFM for specific tasks, you should see the HAFM online help or the
HP StorageWorks HA-Fabric Manager User Guide
for detailed instructions.