FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Director Element Manager User Guide (AA-RTDUC-TE, July 2004)

Information and Error Messages
248 Error Messages
Invalid configuration
name.
Attempted to save an
address configuration
name with an invalid
name.
Use up to 24 alphanumeric
characters, including spaces,
hyphens, and underscores.
Invalid feature key. The feature key was
not recognized.
Re-enter the feature key. Ensure
that you type each character in
the correct case (upper or
lower), include the dashes, and
do not add any spaces at the
end.
Invalid firmware file. The file selected for
firmware download is
not a firmware version
file.
Choose the correct firmware
version file and retry the
operation.
Invalid management
server address.
The IP address
specified for the HAFM
appliance is unknown
to the domain name
server (invalid).
Verify and enter a valid HAFM
appliance IP address.
Invalid network
address.
The IP address
specified for the
product is unknown to
the domain name
server (invalid).
Verify and enter a valid
product IP address.
Invalid port address. Invalid port address
has been entered.
Verify port address through the
Configure Addresses–“Active”
dialog box (FICON
management style only) and
re-enter.
Invalid port number. The port number must
be within a range of
ports for the specific
director or switch
model.
Enter a port number within the
correct range.
Invalid port swap. Port swap selection is
not allowed.
Ensure that each port selected
for swap has not been
previously swapped.
Invalid response
received from switch.
An error occurred at
the switch during a
firmware download
operation.
Retry the firmware download
operation. If the problem
persists, contact the next level
of support.
Table 10: Element Manager Messages (Continued)
Message Description Action