FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Director Element Manager User Guide (AA-RTDUC-TE, July 2004)
Table Of Contents
- Contents
- About this Guide
- Overview
- Feature Keys
- Managing the Director
- Element Manager Description
- Using the Element Manager
- Backing Up and Restoring Element Manager Data
- Monitoring and managing the Director
- Hardware View
- Port Card View
- Port List View
- Node List View
- Performance View
- FRU List View
- Port Operational States
- Link Incident Alerts
- Threshold Alerts
- Configuring the Director
- Configuring Identification
- Configuring Management Style
- Configuring Operating Parameters
- Configuring a Preferred Path
- Configuring Switch Binding
- Configuring Ports
- Configuring Port Addresses (FICON Management Style)
- Configuring an SNMP Agent
- Configuring Open Systems Management Server
- Configuring FICON Management Server
- Configuring Feature Key
- Configuring Date and Time
- Configuring Threshold Alerts
- Creating New Alerts
- Figure 49: Configure Threshold Alert(s) dialog box
- Figure 50: New Threshold Alerts dialog box - first screen
- Figure 51: New Threshold Alerts dialog box - second screen
- Figure 52: New Threshold Alerts dialog box - third screen
- Figure 53: New Threshold Alerts dialog box - summary screen
- Figure 54: Configure Threshold Alerts dialog box - alert activated
- Modifying Alerts
- Activating or Deactivating Alerts
- Deleting Alerts
- Creating New Alerts
- Configuring Open Trunking
- Exporting the Configuration Report
- Enabling Embedded Web Server
- Enabling Telnet
- Backing Up and Restoring Configuration Data
- Using Logs
- Using Maintenance Features
- Optional Features
- Information and Error Messages
- Index
Overview
30 Director Element Manager User Guide
Clear System Error Light
Click this option to turn off the amber system error LED, located below the green
power LED on the director front bezel.
Enable Unit Beaconing
Click the Enable Unit Beaconing check box to toggle unit beaconing on or off.
When the check box has a check mark, unit beaconing is on, and the amber system
error light on the director front bezel blinks to help users locate the actual unit in
an equipment room. When you click the check box to remove the check mark, unit
beaconing is disabled and the amber LED goes out. You can only enable
beaconing if there are no system errors (the system error light is off).
Properties
Click this option to display the Director Properties dialog box. This dialog box
contains the director name, description, location, and contact person configured
through the Configure Identification dialog box. Also included is other product
information, as detailed under “Displaying Director Information” on page 71. You
can also display this dialog box by double-clicking an area in the Hardware View,
away from a hardware component.
Close
Click this option to close the Element Manager window.
Configure Menu
Click the Configure menu to display the following options. For detailed
information on using these options, see “Configuring the Director” on page 115.
Identification
Click this option to display the Configure Identification dialog box. Enter the
following information in this dialog box:
■ Name—Enter a product name. Note that you can set this name as the
nickname for the director’s WWN, using the Set Name as Nickname check
box. The nickname then displays instead of the WWN in Element Manager
views.
■ Description—Enter a unique product description.