FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Director Element Manager User Guide (AA-RTDUC-TE, July 2004)
Table Of Contents
- Contents
- About this Guide
- Overview
- Feature Keys
- Managing the Director
- Element Manager Description
- Using the Element Manager
- Backing Up and Restoring Element Manager Data
- Monitoring and managing the Director
- Hardware View
- Port Card View
- Port List View
- Node List View
- Performance View
- FRU List View
- Port Operational States
- Link Incident Alerts
- Threshold Alerts
- Configuring the Director
- Configuring Identification
- Configuring Management Style
- Configuring Operating Parameters
- Configuring a Preferred Path
- Configuring Switch Binding
- Configuring Ports
- Configuring Port Addresses (FICON Management Style)
- Configuring an SNMP Agent
- Configuring Open Systems Management Server
- Configuring FICON Management Server
- Configuring Feature Key
- Configuring Date and Time
- Configuring Threshold Alerts
- Creating New Alerts
- Figure 49: Configure Threshold Alert(s) dialog box
- Figure 50: New Threshold Alerts dialog box - first screen
- Figure 51: New Threshold Alerts dialog box - second screen
- Figure 52: New Threshold Alerts dialog box - third screen
- Figure 53: New Threshold Alerts dialog box - summary screen
- Figure 54: Configure Threshold Alerts dialog box - alert activated
- Modifying Alerts
- Activating or Deactivating Alerts
- Deleting Alerts
- Creating New Alerts
- Configuring Open Trunking
- Exporting the Configuration Report
- Enabling Embedded Web Server
- Enabling Telnet
- Backing Up and Restoring Configuration Data
- Using Logs
- Using Maintenance Features
- Optional Features
- Information and Error Messages
- Index
Monitoring and managing the Director
83Director Element Manager User Guide
— 0x0D Fabric Binding Mismatch—Fabric Binding is enabled
and detected a connection with a switch or director with an incompatible
fabric membership list.
— 0x0E Authorization Failure Reject—The switch or director
on the other side of an ISL detected a security violation. Your switch
received notification via a generic reject code and sets its port to the
invalid attachment state in sympathy.
— 0x0F Unauthorized Switch Binding WWN—A Switch
Binding error was detected on either an E_Port or an F_Port.
— 0x10 Authentication Failure—ISL Authentication Check
(CHAP) failed.
— 0x11 Fabric Mode Mismatch—A connection was not allowed
because:
■ An HP M-Series switch or director attempted to connect to an HP
switch or director running in Open Fabric mode.
■ An HP M-Series switch or director running in Open Fabric mode
attempted to connect to another vendor’s switch or director with an
incorrect exchange link protocol (ELP) revision level.
— 0x12 CNT WAN Extension Mode Mismatch—The ELP
maximum frame sizes were incompatible because one product running in
CNT WAN extension mode attempted to connect to another product
running in a normal mode.
— 01 Unknown—The reason is not known.
— 02 ISL connection not allowed on this port—ISL is
connected to a port configured as an F_Port.
— 03 ELP rejected by the attached switch—This director
transmitted an exchange link protocol (ELP) frame that was rejected by
the switch at the other end of the ISL.
— 04 Incompatible switch at other end of the
ISL—The switch is configured for Homogenous Fabric mode, and the
switch at the other end of the ISL is an HP switch configured for Open
Fabric 1.0 mode.
— 05 External loopback adapter connected to the
port—A loopback plug is connected to the port, and no diagnostic test is
running.