FW V06.XX/HAFM SW V08.02.00 HP StorageWorks Director Element Manager User Guide (AA-RTDUC-TE, July 2004)
Table Of Contents
- Contents
- About this Guide
- Overview
- Feature Keys
- Managing the Director
- Element Manager Description
- Using the Element Manager
- Backing Up and Restoring Element Manager Data
- Monitoring and managing the Director
- Hardware View
- Port Card View
- Port List View
- Node List View
- Performance View
- FRU List View
- Port Operational States
- Link Incident Alerts
- Threshold Alerts
- Configuring the Director
- Configuring Identification
- Configuring Management Style
- Configuring Operating Parameters
- Configuring a Preferred Path
- Configuring Switch Binding
- Configuring Ports
- Configuring Port Addresses (FICON Management Style)
- Configuring an SNMP Agent
- Configuring Open Systems Management Server
- Configuring FICON Management Server
- Configuring Feature Key
- Configuring Date and Time
- Configuring Threshold Alerts
- Creating New Alerts
- Figure 49: Configure Threshold Alert(s) dialog box
- Figure 50: New Threshold Alerts dialog box - first screen
- Figure 51: New Threshold Alerts dialog box - second screen
- Figure 52: New Threshold Alerts dialog box - third screen
- Figure 53: New Threshold Alerts dialog box - summary screen
- Figure 54: Configure Threshold Alerts dialog box - alert activated
- Modifying Alerts
- Activating or Deactivating Alerts
- Deleting Alerts
- Creating New Alerts
- Configuring Open Trunking
- Exporting the Configuration Report
- Enabling Embedded Web Server
- Enabling Telnet
- Backing Up and Restoring Configuration Data
- Using Logs
- Using Maintenance Features
- Optional Features
- Information and Error Messages
- Index
Monitoring and managing the Director
95Director Element Manager User Guide
■ Port WWN—The port WWN of the attached node (N_Port). The 16-digit
WWN is a set of unique numbers assigned to the device attached to the port.
The WWN is prefixed by the manufacturer’s name of the host bus adapter that
attaches to the device. If there is a nickname assigned, the nickname displays
instead of the WWN.
■ Unit Type—The following information, if supported, is supplied by the
attached device:
— Channel path ##, where ## will be replaced with the Channel Path
Identifier (2 hex digits)
— Communications controller
—Converter
— Direct access storage
—Gateway
—HBA
—Host
—Hub
— Integrated CTC adapter
— Magnetic tape
— Module
—Other
—Printer
— Proxy-agent
— Software driver
— Stand-alone CTC adapter
— Storage subsystem
— Storage device
— Switch
— Terminal (full screen)
— Terminal (line mode)
— Unit record (input)
— Unit record (output)