FW V06.XX/HAFM SW V08.02.00 HP StorageWorks HA-Fabric Manager Appliance Installation Guide (AA-RU5FB-TE, July 2004)

Chapter 2. Installation

Figure 2.6. Install Hexagonal-Nut Standoffs and Securing

Screws

Note

Figure 2-6 does not depict the square alignment washers required between the hexagonal-nut

standoff and rack standard in an HP 9000, 10000, or 1100 0 series cabinet.

Connecting the HAFM Appliance

You can connect the HAFM appliance to the single customer-supplied corporate Ethernet

LAN, with or without an HP-supplied Ethernet hub. This allows remote sessions to the HAFM

appliance from anywhere on the corporate LAN, provides access to manage the Directors

and Edge Switches on this LAN, and allows access to applications such as HP OpenView

Storage Area Manager.

Optionally, you can configure a separate dedicated private LAN between the HAFM appliance,

and the Directors and Edge Switches that it manages.

Note

ThededicatedprivateLANprecludestheuseoftheHPOpenViewStorageAreaManager

application.

Before connecting the HAFM appliance, ensure that it is positioned in its final installation

location on a table or desktop, or installed in an equipment cabinet.

hp StorageWorks HA-Fabric Ma nager Appliance Installation

Guide