HP StorageWorks B-series Data Center Fabric Manager Enterprise, Professional Plus, and Professional 10.3.4 Release Notes (5697-0436, April 2010 - includes all 10.3.x versions)

SolutionClosed defect summary
Fixed in DCFM 10.3.0
The port count is not updated in the Properties dialog for the Mi10K
virtual switch.
Fixed in DCFM 10.3.0
After denying and then allowing the Delete Permission in external FTP,
you cannot open the Technical Support window.
Fixed in DCFM 10.3.0
With an Mi10K switch, Created VF ID is not reflected in the Virtual
Fabric Column of Virtual Switches dialog.
Fixed in DCFM 10.3.0
nl
Workaround prior to this version:
nl
Change the Rx or Tx % utilization
value specified in the policy.
An attempt to use the Configure Threshold dialog to edit a policy does
not work, and the policy is not updated.
Fixed in DCFM 10.3.0
When an M-EOS-based switch is connected to a FOS-based switch,
the Node List tab for the M-EOS switch is blank.
Fixed in DCFM 10.3.0
After upgrading firmware for a FOS-based switch a, blank Topology
is displayed for a mixed fabric.
Fixed in DCFM 10.3.0
After moving ports to logical switches and selecting Re-Enable Ports,
the port enable may fail.
Fixed in DCFM 10.3.0A construction sign appears over a switch icon for no apparent reason.
Fixed in DCFM 10.3.0
The port optics (SFP) option does not appear when you right-click a
switch in Access Gateway mode. You must select the Access Gateway
switch, and then select Port optics from the Monitor menu.
Fixed in DCFM 10.3.0
In an Mi10K configuration, after migrating from EFCM to DCFM, you
cannot open the Zoning dialog for a virtual switch with no ports or
uninstalled ports. A Failed to load Zone DB meta data from
the selected fabric <fabric WWN> due to zoning
database error message appears.
Fixed in DCFM 10.3.0
The Capable Switch Count field in the Firmware Repository dialog
nl
includes virtual switches. This is misleading because the capable switch
count and actual number of switches capable of firmware download
differ.
Fixed in DCFM 10.3.0
Users are unable to activate or deactivate the zone configuration in a
fabric with M-EOS interopmode 2 only, and the resulting error message
is not correct.
Fixed in DCFM 10.3.0
Using an SMI-agent to configure an Mi10K port type to E_Port fails
when connected with DCFM. You cannot set the requested port type
to E_Port.
Fixed in DCFM 10.3.0
In Fabric Port Report, the Connected Devices table lists Integer
value as the model name for the Access Gateway switch and unreach-
able switches instead of the correct model name.
Fixed in DCFM 10.3.0
When a storage device goes offline, the Topology and Device Tree
do not show the status change.
Fixed in DCFM 10.3.0
You cannot open the Replication wizard by right-clicking the core
switch, available in the Chassis Group of the Product Tree.
30