HP StorageWorks B-series Data Center Fabric Manager Enterprise, Professional Plus, and Professional 10.3.4 Release Notes (5697-0436, April 2010 - includes all 10.3.x versions)

Fixed in DCFM 10.3.1DCFM Professional does not include links for smart card drivers.
Fixed in DCFM 10.3.1
SNMPv3 Secure Hash Algorithm (SHA) authentication used in switch
discovery fails, so the switch cannot be discovered with SNMPv3 SHA.
Fixed in DCFM 10.3.1
Having both vendor and vendor Email options is not necessary,
and is confusing. Need to remove the vendor E-mail option.
Fixed in DCFM 10.3.1
Zone details are missing in zone compare. The panel is blank and the
comparison criteria is not clear.
Fixed in DCFM 10.3.1
Zones do not appear correctly after being imported via the save to
operation. Zones are renamed by adding the prefix old_, therefore,
the zones no longer exist in the database, and are not marked with
the green icon.
Fixed in DCFM 10.3.1Logic is reversed with end-to-end monitors.
Fixed in DCFM 10.3.1
Switches discovered via SNMPv1 are being listed in the Informs table,
but they should not be as SNMP Informs is only supported with SNM-
Pv3 (FOS v6.3).
Fixed in DCFM 10.3.1
nl
Workaround prior to this version:
nl
Launch a new client.
In pure M-EOS fabrics, the plus symbol is not removed from the device
tree after accepting changes.
Fixed in DCFM 10.3.1
nl
Workaround prior to this version:
nl
Restart the client.
The local client becomes unresponsive when the total switch count is
10,172 ports.
Fixed in DCFM 10.3.1
M-EOSc switches discovered as seed lose manageability and discovery
status shows Invalid protocol, resulting in the user not getting
manageability of M-EOS switches.
Fixed in DCFM 10.3.1
Zoning activation fails when port index greater than 255 is part of the
zone configuration in interopmode 2 solution
Fixed in DCFM 10.3.1
nl
IMPORTANT:
This fix prevents the crash if JRE
1.6.0_14 is used, but JRE 1.6.0_13
remains the latest supported
version.
The client crashes on launch when using JRE 1.6.0_14.
Fixed in DCFM 10.3.1
A link displayed in Topology for switch-to-switch connection shows an
incorrect port number after disabling/enabling the port, or after a port
swap.
Fixed in DCFM 10.3.1
Appropriate Discovery status is not shown in the Discovery dialog for
VF-enabled switches after modifying the SNMP credentials from v1 to
v3.
Fixed in DCFM 10.3.1
nl
Workaround prior to this version:
nl
Unmonitor/delete the unreach-
able logical switch.
Unable to discover the logical switch after changing the FID without
deleting the existing one.
B-series Data Center Fabric Manager Enterprise, Professional Plus, and Professional 41