HP StorageWorks director 2/64 Order and Configuration Guide

ManualsBrandsHP ManualsStorageHP StorageWorks Director 2/64 base 32 port config

hp Storageworks 6

Ordering and Configuration steps:

Step 1: Choose Field rack or Factory rack part number

Step 2: Select Add on ports (if applicable)

Step 3: Select HA-Fabric manager and server (required on Initial unit)

Step 4: Select Long Wave optics (If applicable)

Step 5: Select Service and Support

Step 6: Select Director FC-64 2Gb Upgrade (if applicable)

HP Referenced Product Accessories

Step 1: Choose Field rackable Director 2/64

Part Number

A6534B or 286809-B21- hp StorageWorks director 2/64

64 port chassis, Field Rack (32 ports Inc., 8 x 4 ports)

Standard with each Director 2/64 (A6534B or 286809-B21)

Two CTP2 cards Ethernet Cable (10/100 CAT5, 10’)

Eight 4-port UPM cards (with thirty two SFP’s) Loopback plug

Rack-mount kit (tray, hardware, and brackets) Þ

Velcro straps for cable management

Accessory kit

(Install guide, Documentation on CD: Service manual,

Two power distribution units (PDUs) power

Product Manager User Guide, HA-Fabric Mgr User Guide, SAN

cords

(250V/10A 2.5m)

Environment Planning Guide, SNMP Guide, CLI Guide & Firmware2.0.x)

Two Power cords (C13/5-15P 125V/10A 3m)

Torque driver and bit (5/32”)

Enterprise safety and regulatory information

Null modem cable (RS-232, 3m)

Þ Rack mount kit will fit E25/33/41 HP racks as well as Standard 19” racks

Choose Factory rackable Director 2/64

Part number

A6534BZ - hp StorageWorks director 2/64

64 port chassis, Factory Rack (32 ports Inc., 8 x 4 ports)

Standard with each Director 2/64 (A6534BZ)