HP StorageWorks M-series Rack Mount Kit Installation Instructions (AA-RQZPE-TE, July 2004)

Installation Instructions

17M-series Rack Mount Kit Installation Instructions

Installing the Shelf Brackets in the M-Series Rack

Use these steps to install the two shelf brackets in the rack.

1. Determine the appropriate placement for the switch inside the rack. It is

important to consider the number of switches you intend to install. See “Tips

for Installing More than One Switch” on page 16

2. Count the round openings in the rail to identify the required position for the

switch. Count three round openings for every rail unit, or U, along the rail.

3. Locate the round hole that corresponds with the required U position, as shown

in Figure 2.

Figure 2: Securing shelf brackets

1 Rack Rail

2 Round opening in rail

3 Washers and screw

SHR-2320