HP StorageWorks M-series Rack Mount Kit Installation Instructions (AA-RQZPE-TE, July 2004)

Installation Instructions
18 M-series Rack Mount Kit Installation Instructions
4. Position the higher, shelf bracket threaded hole in this round opening, as
shown in Figure 2.
5. Orient the shelf bracket in the rails.
6. Insert a small washer into the rail hole.
7. Insert a screw through the rail hole, the small washer in the hole, and up to the
threaded hole in the shelf bracket.
8. Partially tighten the screw to temporarily stabilize the shelf bracket.
9. Make sure the shelf bracket is level, and align the rear of the shelf bracket
with the appropriate position on the rear rail, as shown in Figure 2.
10. Repeat steps 4 through 8 for the rear end of the shelf bracket.
11. Repeat steps 1 through 10 for the second shelf bracket.
12. Completely tighten all screws attaching shelf brackets to the rack rails.
Torque the screws to 22 in-lbs.