m-series rack mount kit installation instructions

1m-series rack mount kit installation instructions
Installation Instructions
This section describes the procedures used for installing a StorageWorks Director 2/64
in an m-series rack, using the m-series rack mount kit (DS-DMGGD-AF).
Preparing for Installation
Kit Contents
Your m-series rack mount kit should contain the items listed in Table 2.
Table 2: Contents of M-Series Rack Mount Kit
Number Item Quantity
Quantity
Required
1 Shelf Brackets 2 2
2 Front Mounting Brackets, left and right, flat 2 2
3 Rear Mounting Brackets, left and right, angle 2 2
4 Front Angle Brackets, left and right 2 2
5 Pouch containing HP m-series rack mount hardware:
10-32 X 0.5 in. Phillips panhead screws with lock
washers—Installs Shelf and Angle Brackets to rails, also
Front Mounting Brackets to Front Angle Brackets
10-32 X 0.375 in. Phillips flathead screws—Installs Front
and Rear Mounting Brackets to Director 2/64
10-32 cage nuts—Installs Front and Rear Angle Brackets to
rail
Stainless Steel Washers—0.191 in. ID, 0.278 in. OD, 0.032
in. thick, installs Shelf Brackets to rails
Square Alignment Washers (only used with 9000 Series
rack)
22
8
10
8
10
20
8
8
8
0