m-series rack mount kit installation instructions

Installation Instructions
5m-series rack mount kit installation instructions
Figure 2: Securing shelf brackets
4. Position the higher, shelf bracket threaded hole in this round opening, as shown in
Figure 2.
5. Orient the shelf bracket in the rails.
6. Insert a small washer into the rail hole.
7. Insert a screw through the rail hole, the small washer in the hole, and up to the
threaded hole in the shelf bracket.
8. Partially tighten the screw to temporarily stabilize the shelf bracket.
1 Rack Rail
2 Round opening in rail
3 Washers and screw
SHR-2320
1
2
3