Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

Fabric OS Command Reference 1015
53-1001764-01
thConfig
22
To set high thresholds for the security class and login violation area with SNMP alerts and save the
thresholds nonpersistently:
switch:admin> thconfig --set security -area lv \
-highth-value 0 -trigger above \
-action snmp -nosave
switch:admin> thconfig --set security -area lv \
-highth -value 0 -trigger below \ \
-action none -nosave
To cancel the custom settings that have previously been saved nonpersistently.
switch:admin> thconfig --cancel security -area lv \
-action cust -thresh_level cust
To display the Fabric Watch configuration for the QSFP temperature on a DCX 8510-8:
switch:admin> thconfig --show sfp -area temp -sfptype qsfp
Class: SFP
SFP TYPE: QSFP
Area : TEMP
ThLevel : Def
ActLevel: Def
High :
Custom:
TimeBase: None
Value : 85
Trigger : Above Action: Raslog
Trigger : Below Action: Raslog
Default:
TimeBase: None
Value : 85
Trigger : Above Action: Raslog
Trigger : Below Action: Raslog
Low:
Custom:
TimeBase: None
Value : -5
Trigger : Below Action: Raslog
Default:
TimeBase: None
Value : -5
Trigger : Below Action: Raslog
Buffer:
Custom:
Value : 0
Default:
Value : 0
To display only the custom thresholds for the QSFP temperature:
switch:admin> thconfig --show sfp -area temp \
-sfptype qsfp -thresh_level cust
Class: SFP
SFP TYPE: QSFP
Area : TEMP
ThLevel : Def
ActLevel: Def
High :