Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

xxii Fabric OS Command Reference
53-1002147-01
Access Gateway
• New options to support static F_Port mapping:
- ag --staticadd N_Port [F_Port1; F_Port2;...]
- ag --staticdel N_Port [F_Port1; F_Port2;...]
• New options to configure reliability counters:
- ag --reliabilitycounterset
- ag --reliabilitycountershow
• agShow - Displays additional Access Gateway F-Port information if both switches run Fabric OS
v7.0.0
Advanced Performance Monitoring (APM).
• perfTTmon - updated for Condor 3 platforms. Now supports Top Talkers on E_Ports,
• On Condor 3 platforms, EE monitors are supported on F_Ports and E_Ports.
- perfAddEEMonitor
- perfDelEEMonitor
- perfMonitorShow
• perfResourceShow - The -fPortRes operand has been changed to -portttRes.
Deprecated legacy monitors and commands, removed filter support from remaining performance monitor
commands.
Bottleneck Monitoring
New options to the bottleneckMon command to configure sub-second thresholds:
• bottleneckMon --config -lsubsectimethresh time_threshold
• bottleneckMon --config -lsubsecsevthresh severity_threshold
Buffer Credit Loss Detection and Recovery
The bottleNeckMon command has been enhanced to configure and display credit loss detection and
recovery tools.
• bottleneckMon --cfgcredittools
• bottleneckMon --showcredittools
QoS
• Support for CS_CTL-based traffic prioritization.
- portCfgQoS - --enable | --disable [slot/]port[-port] csctl_mode
- portCfgShow - displays CSCTL mode:ONN or OFF.
• Update for new platforms:
- portCfgQoS - Updated rate limit values for new platforms: 9000, 10000, 11000, 12000, 13000,
14000, 15000, 16000.
Diagnostics
Support new 16G platforms: