Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

Fabric OS Command Reference xxiii
53-1002147-01
• portLedTest - The --slot option must be specified with the -port option on bladed systems.
• bpPortLoopbackTest - New spd_mode 16 for 16G platforms.
• PortLoopbackTest - New spd_mode 10 and 16 for 10G and 16G platforms.
Encryption
Updates to cryptoCfg command to support the following new functionality:
• cryptocfg --reclaimWWN - Support for moving an encryption switch or blade to another encryption
group and reclaiming the WWN.
• cryptocfg --kvdiag - Provides an interface for key vault diagnostics.
• cryptocfg --show -mkexported_keyids - Lists exported master keys.
Fabric Services
• The following commands have been enhanced to display Diagnostic D_Port information for
inter-switch link testing:
- fabPortShow
- fabricLog
- portCfgShow
- portShow
- switchShow
• fabricLog - Added descriptions of port states and switch states.
• Support for Fabric Name:
- switchShow - Displays Fabric Name if configured.
- FabricShow -Displays Fabric Name if configured.
• Support FCP probing on NPIV devices.
- fcpProbeShow - Display the probing information for NPIV devices.
- configure - New configuration parameter "Allow NPIV Probing".
• Support for user-defined port name:
- portName - Sets default port name up to 128 characters long.
- Use the configure command to disable the feature.
- The portShow command displays the port name.
- configure - New option to disable assignment of a default port name:
Fabric Watch
Updates to the following help pages:
• SwitchStatusPolicySet - Support for Missing SFP and Error Port policies.
• SwitchStatusPolicyShow - Support for Missing SFP and Error Port policies.
• SwitchStatusShow - Support for Missing SFP and Error Port policies.
• sfpShow - Enhanced to support the following new displays:
- New -health operand displays Fabric Watch information for 10G/16G SFPs and 16G QSFPs.
- Tracks fabric watch state transitions for these new SFPs.
- Speed unit changed to Gbps (from MB/S).
- New field displays power on time in years/hours.
• fwFruConfig - Support for SFP State Change configuration (no. longer done with thConfig).