Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

200 Fabric OS Command Reference
53-1001764-01
cryptoCfg
22
nscamshow for remote switches:
Switch entry for 2
state rev owner
known v611 0xfffc01
Device list: count 13
Type Pid COS PortName NodeName
NL 0208d3;3;20:0c:00:06:2b:0f:72:6d;20:00:00:06:2b:0f:72:6d;
FC4s: FCP
PortSymb:[55]"LSI7404XP-LC BR A.1 03-01081-02D
FW:01.03.06 Port 1"
Fabric Port Name: 20:08:00:05:1e:34:e0:6b
Permanent Port Name: 20:0c:00:06:2b:0f:72:6d
Port Index: 8
Share Area: No
Device Shared in Other AD: No
Redirect: No
Partial: No
b. Create and enable a zone named "itzone" that includes initiator and target.
FabricAdmin:switch> zonecreate itzone, \
"10:00:00:00:c9:2b:c9:3a; 20:0c:00:06:2b:0f:72:6d"
FabricAdmin:switch> cfgcreate itcfg, itzone
FabricAdmin:switch> cfgenable itcfg
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration
with the current configuration selected.
Do you want to enable 'itcfg' configuration \
(yes, y, no, n): [no] y
zone config "itcfg" is in effect
Updating flash ...
2. Create a disk CryptoTarget container to be hosted on the encryption engine.
FabricAdmin:switch> cryptocfg --create -container \
disk my_disk_tgt1 0:00:00:05:1e:41:9a:7e
20:0c:00:06:2b:0f:72:6d 20:00:00:06:2b:0f:72:6d
Operation Succeeded
3. Add an initiator to the CryptoTarget container and commit the transaction.
FabricAdmin:switch> cryptocfg --add -initiator my_disk_tgt \
10:00:00:00:c9:2b:c9:3a 20:00:00:00:c9:2b:c9:3a
Operation Succeeded
FabricAdmin:switch> cryptocfg --commit
Operation Succeeded
4. Display the CTC configuration.
FabricAdmin:switch> cryptocfg --show -container \
my_disk_tgt -cfg
Container name: my_disk_tgt
Type: disk
EE node: 10:00:00:05:1e:41:9a:7e
EE slot: 0
Target: 20:0c:00:06:2b:0f:72:6d \
20:00:00:06:2b:0f:72:6d
VT: 20:00:00:05:1e:41:4e:1d \
20:01:00:05:1e:41:4e:1d