Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

ManualsBrandsHP ManualsStorageHP StorageWorks Director 2/64

321

322

323

324

325

326

327

328

329

330

Fabric OS Command Reference 287

53-1001764-01

fcPing

Pinging 21:00:00:20:37:25:ad:05 [0x211e8] with 12 bytes of data:

Request rejected

5 frames sent, 0 frames received, 5 frames rejected, 0 frames timeout

Round-trip min/avg/max = 0/0/0 usec

To display one device that accepts the request and another device that does not respond to the request:

switch:admin> fcping 0x020800 22:00:00:04:cf:75:63:85

Source: 0x20800

Destination: 22:00:00:04:cf:75:63:85

Zone Check: Zoned

Pinging 0x20800 with 12 bytes of data:

received reply from 0x20800: 12 bytes time:1159 usec

received reply from 0x20800: 12 bytes time:1006 usec

received reply from 0x20800: 12 bytes time:1008 usec

received reply from 0x20800: 12 bytes time:1038 usec

received reply from 0x20800: 12 bytes time:1010 usec

5 frames sent, 5 frames received, 0 frames rejected,0 frames timeout

Round-trip min/avg/max = 1006/1044/1159 usec

Pinging 22:00:00:04:cf:75:63:85 [0x217d9] with 12 bytes of data:

Request timed out

5 frames sent, 0 frames received, 0 frames rejected,5 frames timeout

Round-trip min/avg/max = 0/0/0 usec

To use fcPing with a single destination (in the example, the destination is a switch WWN):

switch:admin> fabricshow

Switch ID Worldwide Name Enet IP Addr FC IP Addr Name

-----------------------------------------------------------------

6: fffc06 10:00:00:05:1e:34:2b:66 10.202.90.201 0.0.0.0 "mps_daz_1"

55:fffc37 10:00:00:05:1e:34:01:f5 10.202.90.226 0.0.0.0 pulsar055"

switch:admin> fcping 10:00:00:05:1e:34:2b:66

Destination: 10:00:00:05:1e:34:2b:66

Pinging 20:00:00:05:1e:34:2b:66 [fffc06] with 12 bytes of data:

received reply from 10:00:00:05:1e:34:2b:66 : 12 bytes time:1162 usec

received reply from 10:00:00:05:1e:34:2b:66 : 12 bytes time:1013 usec

received reply from 10:00:00:05:1e:34:2b:66 : 12 bytes time:1442 usec

received reply from 10:00:00:05:1e:34:2b:66 : 12 bytes time:1052 usec

received reply from 10:00:00:05:1e:34:2b:66 : 12 bytes time:1012 usec

5 frames sent, 5 frames received, 0 frames rejected, 0 frames timeout

Round-trip min/avg/max = 1012/1136/1442 usec

To use fcPing with a single destination (in the example, the destination is a device node WWN):

switch:admin> nsshow

{

Type Pid COS PortName NodeName TTL(sec)

N 370500;3;20:07:00:05:1e:35:10:7f;10:00:00:05:1e:35:10:7f; na

Fabric Port Name: 20:05:00:05:1e:34:01:f5