Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

Fabric OS Command Reference 343
53-1001764-01
ficonShow
22
ficonShow
Displays the contents of the specified FICON database.
SYNOPSIS ficonshow database [fabric]
DESCRIPTION Use this command to display the contents of a FICON database. The ficonShow database operand is
the name of the database to display. If the fabric operand is absent, the command displays the members
of the named database that are local to the switch on which the command was issued. If the fabric
operand is present, it must be entered exactly as shown, and this specifies that all members are
displayed, both local and remote.
The following information may be displayed, depending on which database you enter and which
operands you use with the command:
Domain
Displays the domain ID.
Fabric WWN
Displays the fabric WWN.
Flag
Indicates if the node is valid, not valid, or not current. Flag values are as follows:
0x00
Indicates the node ID of the storage port is valid.
0x10
Indicates the node ID of the channel port is valid.
0x20
Indicates the node ID of the storage port is not current.
0x30
Indicates the node ID of the channel port is not current.
0x40
Indicates the node ID of the storage port for the RNID switch for RLIR is not valid.
0x50
Indicates the node ID of the channel port is not valid.
Fmt
Displays the record-registration format.
FRU Failure Description
Indicates the FRU failure type as one of the following:
WWN card [unit number]
The WWN card
Power Supply [unit number]
The Power Supply card
Hardware Slot [unit number]
The Hardware Slot
Blower [unit number]
The Blower
FRU Part Number
Displays the FRU part number.
FRU Serial Number
Displays the FRU serial number.