Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

Fabric OS Command Reference 347
53-1001764-01
ficonShow
22
Time Stamp
Displays the timestamp, expressed in date format.
Type
Same as Port Type.
Type Number
Displays the type number of the self-describing node. It also describes the
machine type.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
database
Specify the database to display. This operand is required. Valid values include the
following
RNID
Device node identification.
LIRR
Devices registered to receive link incident reports. Entries can have the following
flags:
-C*
A user-configured LIRR entry defined as current (set with the ficonCfg
command).
-C
A LIRR entry defined by the management server demon as current based on
order.
-S
A LIRR entry defined by the management server demon as secondary.
SwitchRNID
Switch node identification.
RLIR
Link incident reports.
ILIR
Implicit link incident reports.
fabric
Displays FICON database information for the entire fabric. This operand is
optional; if omitted, only local members of the named database are displayed.
EXAMPLES To display the local RNID database:
switch:admin> ficonshow RNID
{
{Fmt Type PID Registered Port WWN Registered Node WWN \
0x18 N 502b00 50:05:07:64:01:00:15:8d 50:05:07:64:00:c1:69:ca \
flag Parm
0x10 0x200110
Type number: 002064
Model number: 101
Manufacturer: IBM
Plant of Manufacture: 02
Sequence Number: 0000000169CA