Brocade Fabric OS Command Reference Manual Supporting Fabric OS v7.0.0 (April 2011)

522 Fabric OS Command Reference
53-1001764-01
msTdEnable
22
msTdEnable
Enables the Management Server (MS) topology discovery service.
SYNOPSIS mstdenable ["ALL"]
DESCRIPTION Use this command to enable the MS topology discovery service on the local switch or throughout the
fabric. The change takes effect immediately and commits to the configuration database for all affected
switches. The change is persistent across power cycles and reboots.
NOTES Topology Discovery Management requires the attached devices (including attached switches) to support
request node identification data (RNID) extended link service (ELS).
When an FCS policy is enabled, and this command is issued with the "ALL" operand, it can be issued
only from the primary FCS.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
This command is supported only in AD0 and AD255 contexts.
OPERANDS The following operand is optional:
"ALL"
Enables the MS topology discovery service throughout the fabric. This operand
must be enclosed in double quotation marks.
EXAMPLES To enable the MS topology discovery service on the local switch:
switch:admin> mstdenable
Request to enable MS Topology Discovery Service
in progress....
done.
*MS Topology Discovery enabled locally.
To enable MS topology discovery on all switches in the fabric:
switch:admin> mstdenable "ALL"
Request to enable MS Topology Discovery Service
in progress....
done.
*MS Topology Discovery enabled locally.
*MS Topology Discovery Enable Operation Complete!!
SEE ALSO msTdDisable, msTdReadConfig